Product/Service

HI 5701VT Vibration Transmitter

Source: Hardy Instruments, Inc.
The HI 5701VT is a two wire, loop-powered transmitter with a 4-20 mA output proportional to velocity vibration

The HI 5701VT is a two wire, loop-powered transmitter with a 4-20 mA output proportional to velocity vibration. The HI 5701VT is ideal for auxiliary equipment such as fin fans. It is easy to install on most machines or bearings. The HI 5701VT connects directly to a DCS, PLC, or other monitoring instruments, allowing the PLC or DCS system to warn operators about machinery operation. This allows low-cost continuous monitoring and verification of high vibration readings reported by the monitoring system. The H1 5701VT also provides a raw signal output.

The transmitter body is stainless steel making it suitable for even the harshest installations. It's top has a 1 in. NPT (pipe thread) for easy attachment to conduit fittings. It is isolated from ground and has an inner shield for protection from RIF signals. The transmitter has a hazardous area certification by CSA and is suitable for Class 1, Division 1 use.